-40%
2 x 60CM LED DRL Light Amber Sequential Flexible Turn Signal Strip For Headlight
$ 5.06
- Description
- Size Guide
Description
Introduction :This new Flexible Tube Design Switchback LED is for headlight project effect.
Uses powerful SMD LED in a strip. Can be used for numerous other lighting designs.
Voltage DC12V Operation can be wired into your existing car lights or other projects.
Ultra Bright 2835 SMD LED lights to be used as daytime running lights and turn signal lights.
Applicate for Angel eye, headlight turning light.
Fit for most Car , Truck, Motorcycle , etc .
Can dress up the headlights similar to the new Style.
Waterproof-both for Interitor & Exterior of Car use, simply installation.
The lights can be cut
. One resistor is in charge of 3 led chip.
Note:
There is double-sided glue on both sides of the lamp bar. No need to distinguish the left side and right side. Any one can be installed on the left side or the right side. When installed, only one side of the double-sided glue needs to be torn off.
Turn signal lights Light up in flowing sequentially.
Description:
Type: Daytime Running Light + Turn Signal (with the Controller)
LED Type: 2835 SMD
Light Colour: White DRL +Yellow(Turn Signal)
Thickness:3mm
width: 15mm
length: 60cm
Turn Signal Light Model: Flowing Water
Voltage: 12V DC
Watt: 20W
Wire: 3
Length: 60cm
Cable Length: 60cm
Main Material: Soft Silicone
Placement on Vehicle: Front, Left, Right
Water resistance: Yes.IP68
Function: White Daytime Running Lights / Yellow Turn Signal Lights (Flowing Water Model Light)
Package Included:
2 x 60cm CM Super Slim Strip Tape Lights (with Drive box)
Wires Connections:
Black wire = Negative
Red wire = White light, Connecting to headlight or ACC+
Yellow wire = Yellow light, Turn Signal Lights (Flowing Water Model Light)
Installation Notes(Must be tested before installed):
Not a plug and play product, some professional skills or tools are needed.
Can be cut as your need .
Can be bent but cannot be folded or beat arbitrarily, the LEDs inside will be damaged.
Need to open the brake cover for installing.