PATHWAY DMX REPEATER PRO 9116 . NEW PATHWAY CONNECTIVITY SOLUTION.

Description

PATHWAY DMX REPEATER PRO 9116. NEW. PATHWAY CONNECTIVITY SOLUTION. NEW.
RDM/DMX Repeater Pro [9114, 9115, 9116, 9117, 9118]
An intelligent opto-splitter that brings Ethernet-type features to plain DMX networks.
An increasingly important part of DMX data distribution systems, the Repeater Pro's support for RDM (Remote Device Management) allows the Repeater Pro to act as an RDM Controller, or a bidirectional RDM splitter.
In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automatically route the signal to the remaining ports—eliminating the need for patch bays.
The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam—ideal for incorporating remote focus units.
Features
Specifications
Compliance
Physical
Tips & Tricks
Silent operation
8 outputs
E1.20 RDM and  E1.11 DMX512A compliant
Three modes: RDM, Merge, and Hub
RDM discovery and end device management from the front panel
RDM can be disabled on a port-by-port basis to accommodate older equipment
Merge two controllers without any additional gear
Automatically switch a console between locations by simply unplugging and replugging the console
Units running in different modes can be chained together
Fully configurable from the front display
DMX output speed and signal loss behavior are user-selectable, including hold forever
Monitor incoming DMX signal levels in real time
DMX Console sends a channel level to all ports, for an independent DMX signal check on end devices
Self-resetting over-voltage protection on all ports
Ships with rack ears
Models
Description
9114
DMX Repeater Pro, 8-way, Rear XLR5, Fully Isolated
9115
DMX Repeater Pro, 8-way, Rear Terminal, Fully Isolated
9116
DMX Repeater Pro, 8-way, Front XLR5, Fully Isolated
9117
DMX Repeater Pro, 8-way, Rear RJ45 Ethercon, Fully Isolated
9118
DMX Repeater Pro, 8-way, Front RJ45 Ethercon, Fully Isolated
Accessories
9002
Wall mount kit
9003
Truss mount kit
PRODUCT OVERVIEW SPECIFICATIONS An intelligent opto-splitter that brings Ethernet-type features to plain DMX networks. RDM (Remote Device Management) support allows the Repeater Pro to act as an RDM Controller, or as a proxy. In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automatically route the signal to the remaining ports—eliminating the need for patch bays. The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam—ideal for incorporating remote focus units.  85-250VAC 50/60 Hz wide-ranging power input  Operating Conditions: -10 to +50°C, 5-95% relative humidity, non-condensing  0.75A power consumption  2500V opto-isolation between all ports  250V fault protection per port FEATURES  Silent operation  8 outputs  E1.20 RDM and E1.11 DMX512A compliant  Three modes: RDM, Merge, and Hub  RDM discovery and end device management from the front panel  RDM can be disabled on a port-by-port basis to accommodate older equipment  Merge two controllers without any additional gear  Automatically switch a console between locations by simply unplugging and replugging the console  Units running in different modes can be chained together  Fully configurable from the front display  DMX output speed and signal loss behavior are userselectable, including hold forever  Monitor incoming DMX signal levels in real time  DMX Console sends a channel level to all ports, for an independent DMX signal check on end devices  Self-resetting over-voltage protection on all ports  Racxk ears included STANDARDS COMPLIANCE  ETL  CE  RoHS 2002/95/EC  E1.20 RDM R2010—